Avoiding the Wet Dog Look

Avoiding the Wet Dog Look

Reasons Your Water Softener Isn't Softening Your Water

Darlene Stanley

Different problems can cause your water softener to stop working properly. If you notice the water no longer feel silky, then it's time to take a look at the tank to see what's going on. The tank may seem to be running, but if it's not softening the water, you'll need to do some investigating. There are a few checks to make yourself before you call a plumber for help. Here are some possible reasons your water softener isn't working.

Things To Check Yourself

Take a look inside your water softener and note the level of salt in the tank. If the salt level seems fine, press down on the top of the salt layer with a broom handle to see if the handle passes all the way to the bottom of the tank without any obstructions. If the handle hits a hard area, your tank may have a salt bridge. This is a hard layer of salt that makes the tank look fuller than it really is. Break up the hard layer gently so it falls to the bottom of the tank so you can add more salt. Other things you can check yourself are the hose connections, to make sure there are no kinks, and the settings on the softener to make sure they haven't been changed.

Checks And Repairs A Plumber May Do

The plumber may check the brine tank for mush at the bottom. This indicates the tank should be cleaned. The resin tank may also need to be cleaned to get the water softener working properly again. The plumber also notes the level of water in the brine tank. The brine tank doesn't fill all the way with water, so if the water level is too high, it could indicate a problem with the float valve that's responsible for shutting off the water. Another common problem that affects water softeners is a clogged resin tank injector. This can be fixed by removing the injector and cleaning it. The drain line can be checked at the same time since it sometimes gets clogs in it too.

If your water softener is fairly new, these simple repairs may get it working again. If your unit is old and near the end of its working life, then you may need to think about having it replaced soon. The resin beads could be old and if that's the case, you'll need to decide if you want to invest in a new resin bed or replace the softener. For more information, contact a company like Aqua Masters Water Conditioning Inc today.


Share

2018© Avoiding the Wet Dog Look
About Me
Avoiding the Wet Dog Look

During the summer months, I enjoy taking care of my outdoor plants and flowers. Because I live in the southern United States, my vegetation needs water almost daily. Thankfully, I have a convenient outdoor faucet connected to my home. However, I recently endured some problems with this source of water. When I turned on the faucet, I was greeted with a forceful spray of water going in all directions. Before I could gather my senses and turn the water off, I resembled my dog after she jumps into a pool of water. To avoid the wet dog look in the future, I plan to hire a professional plumber to take care of my faulty faucet. On this blog, you will learn about the benefits of securing a reputable plumber to repair your problematic faucets.